Sylvania LC155SL8 - Manuel (Page 16)

16
EN
W
ATCHING TV
Switching Each Mode
You can easily switch with the remote control to the DTV (ATSC) and TV
(NTSC) or to access an external device when they are connected to the unit.
1
Press [INPUT] repeatedly to cycle through analog TV,
digital TV, VIDEO1 and VIDEO2.
[ANALOG MODE]
[DIGITAL MODE]
[VIDEO1]
[VIDEO2]
• To use the video or S-video input jack on the unit,
select “VIDEO1”.
• To use the component video input jack on the unit,
select “VIDEO2”.
Note:
• When you switch the analog mode to the digital mode,
it may take a while until the digital channel selection is
completed. The following TV screen is displayed while
switching the mode.
NOW SCANNING
5 MTS System
MTS (multichannel television sound) system is the method of encoding 3
additional channels of audio into an NTSC-format audio carrier. This section
describes how to switch the audio in the analog mode and how to switch
the audio language in the digital mode.
TV
Press [AUDIO] repeatedly to cycle through the
available audio channel.
[MAIN]
[SAP]
[MONO]
MAIN : Outputs main-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
DTV
1
Press [AUDIO] to display the currently selected
language and the number of available languages.
KABC CH 95-03
A Day of Memories
ENGLISH
2
Press [AUDIO] repeatedly to cycle through the
available audio languages.
[ENGLISH]
[SPANISH]
[FRENCH]
• Available languages differ depending on the
broadcast.
• The information display will automatically disappear
in 1 minute.
Note:
• Pressing [AUDIO] does not control external audio device.
5