RCA GE 26790 - Manuel (Page 5)

5
D
ESKTOP
I
NSTALLATION
1. Set the T/P switch to
T for touch-tone
service, or P for
pulse (rotary)
service. If you don’t
know which type of
service you have,
check with the phone company.
2. Set RINGER switch (on the handset) to ON.
3. Plug the power supply cord into the POWER 9V DC jack on the base and
into an AC outlet.
4. Place handset in the base to charge for 12 hours. The CHARGE/IN USE
indicator (on the base) comes on to indicate that the battery is charging.
If you don’t charge the handset battery properly (for 12 hours)
when you first set up the phone, performance of the battery
will be compromised.
5. Plug the telephone line cord into the PHONE LINE jack on the base and
into a modular jack.
6. Raise the base antenna.
CAUTION: Use only the Thomson 5-2471 power supply that came with this unit.
Using other power supplies may damage the unit.
INSTALLATION NOTE: Some cordless telephones operate at frequencies
that may cause interference to nearby TVs and VCRs. To minimize or prevent
such interference, the base of the cordless telephone should not be placed
near or on top of a TV or VCR. If interference continues, moving the cordless
telephone farther away from the TV or VCR will often reduce or eliminate the
interference.
I
NSTALLATION
CH AR GE
ME SS AG ES
RE VIE W
SK IP PL A Y /S TO P
AN NO UN CE
AN SW O N/O FF
ME MO
P A GE
ER AS E
T/P switch
4
2
1
6
5
3