RCA VR642HF - Manuel (Page 13)

11
Setting Up the VCR
Startup
10. Set the Time and Date.
The TIMER indicator on the VCR front panel flashes until the
time is set.
A . Press MENU on remote to display the VCR MAIN MENU .
B . Press 2 to display the TIME menu.
C . Press 1 to display SET TIME AND DATE .
D . Enter the time and date with the number buttons on the
remote.
¥ Press 0 before single-digit numbers.
Example: press 0, then 5, then 0, then 7 for a time
of 5:07. Press 1 for AM or 2 for PM.
¥ Press CLEAR on the remote to change incorrect entries.
E . Press MENU to start the clock.
F . Press 0 twice to exit.
The time and date appear on the screen when you press
DISPLAY .
11. Set the Automatic Daylight-Saving Time
Select this feature if you want the VCRÕs clock automatically to
advance one hour in April and reverse one hour in October
A . Press MENU on the remote to display the VCR MAIN
MENU .
B . Press 2 to display the TIME menu.
C . Press 2 to select AUTO DST: ON or OFF .
¥ Select ON if you want the VCRÕs clock to automatically
adjust for Daylight Saving Time.
¥ Select OFF if you do not want the VCRÕs clock to
automatically adjust for Daylight Saving Time.
In the Spring, daylight-saving time begins on the first
Sunday in April. Clocks are set forward one hour.
Because the clock automatically changes from 2:00 AM to
3:00 AM, keep in mind that any part of a scheduled Timer
Recording that falls between these two times is not
performed.
In the autumn, daylight-saving time begins on the last
Sunday in October. Clocks are set back one hour.
The VCR clock automatically changes from 2:00 AM to
1:00 AM. Therefore, it can affect your recording length.
SET TIME AND DATE
TIME 09:39 AM
DATE 08/04/96 SUNDAY
PRESS CLEAR TO CORRECT
PRESS MENU TO SET
VCR MAIN MENU
1 TIMER RECORDINGS
2 TIME
TIME
1 SET TIME AND DATE
2 AUTO DST: ON
0 EXIT
VCR MAIN MENU
1 TIMER RECORDINGS
2 TIME
TIME
1 SET TIME AND DATE
SET TIME AND DATE
TIME --:-- --
(HH:MM)
DATE --/--/--
PRESS MENU TO CANCEL