RCA 21011 - Manuel (Page 17)

17
3. Use the touch tone pad on the base to select 1TONE or 2PULSE, or press
the CID (up or down arrow) button to move the arrow to your selection.
The default setting is
1.
4. Press the OK soft key to save your selection, and return to the main
menu. The dialing mode displays for two seconds.
NOTE: Press the EXIT soft key to keep the previous setting and return to the
main menu screen.
NOTE: If you aren’t sure which dialing system you have, set the telephone to
tone dialing and make a test call. If the call connects, the setting is correct. If
the call does not connect, set the telephone to pulse dialing.
H
ANDSET
R
EGISTRATION
This setting may be made with the handset only. During the registration
process, keep your handset near the base. Make sure your handset is at
the main menu. Make sure your phone is OFF (not in TALK mode).
1. Press the cid/vol (up or down arrow) button to scroll to REGISTRATION.
2. Press the OK soft key and REGISTER HANDSET? shows in the display.
TONE
TONE / PULSE
OK
TIME
EXIT
RINGER TONE
OK
REGISTRATION
EXIT