RCA 27V550T - Manuel (Page 11)

Chapter 2 9 Graphics contained within this publication are for representation only.
Chapter 2: Using the Remote Control
Button Descriptions for TV Mode
Arrows Used to highlight different items in the TV menu and to adjust the menu
controls.
Indicator Indicates the programming mode when programming the remote to
control components. Lights when you press a valid button on the remote. Flickers
when a button is pressed and the batteries are low.
(0-9) Number Buttons Enter channel numbers and time settings directly
through the remote control.
To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press
the two digits and expect a few seconds delay. This is if you want to enter a third
digit.
CH + or CH - Scans up or down through the current channel list. Press once to
change the channel up or down; press and hold to continue changing channels.
CLEAR Removes any menu or display from the screen and returns you to normal
viewing.
GO BACK Returns you to the previous channel.
INFO Brings up the channel banner.
INPUT Toggles through the available input sources (VID1/SVID1, VID2/CVID2,
FRNT, VPORT and current channel).
MENU Brings up the Main menu.
MUTE Reduces the TV’s volume to its minimum level. Press again to restore the
volume.
OK When in the menu system, selects highlighted items.
ON•OFF When in TV mode, turns the TV on and off. If in another mode (VCR,
DVD, etc.) and programmed, will turn the component on and off.
PRESETS Picture options are reset to original factory settings.
SKIP Press once before changing channels and the TV will wait 30 seconds before
returning to the original channel. Press repeatedly to add more time.
TV Turns on the TV and puts the remote in TV mode. Also displays current status.
VOL – or VOL + Decreases or increases the TV’s volume.
VPORT Tunes the TV to the VPORT input channel. You can program this button
to control a VCR or DVD player. When programmed, changes the mode of the
remote when the button is pressed. To restore the VPORT button to factory default
mode (unprogrammed), press and hold VPORT, then press 1, 0, 0, and 0.
Button Descriptions for DVD and VCR Modes
AGAIN In DVD mode, replays the last several seconds of the title you’re playing.
ANTENNA In VCR mode, functions as a TV/VCR button.
DVD Puts the remote in DVD mode and, if auto tuning is enabled, will turn on
the TV and tune to the correct video input channel.
GUIDE If you’re operating another component that has a guide, this button
accesses the on-screen Guide.
DVD ON OFF
VCR TV
VOL
MUTE GO BACK
CH
CLEAR MENU
PRESETS
VPORT
GUIDE
INFO
SKIP
1 2 3
4 5 6
7 8 9
0 INPUT ANTENNA
REVERSE PLAY FORWARD
RECORD STOP PAUSE
AGAIN ZOOM OPEN CLOSE
SPEED SEARCH
OK OK
Indicator