NuTone VSC4S - Manuel (Page 5)

VSM4SK AND VSUC4SK VIDEO DOOR ANSWERING
REPRESENTATIVE WIRING ILLUSTRATION
INSTALLATION
CONTENTS OF CARTON
Check (_) for following VSC4S carton contents:
VSC4S Door Camera with mounting frame and
rubber gasket
Hardware bag assembly containing:
(2) #6 x 1 1/4" screws
(2) #6 x 3/4" machine screws
(1) 4mm camera attachment screw
Installation Instructions
VSM4SK VSUC4SK
5
Note to Installer: Do not discard these instal-
lation instructions. Please give all installation
instructions, warranty registration and home-
owner’s manual to homeowner.
PRECAUTIONS AND GUIDELINES
The NuTone VSC4S door camera has been designed to
work with NuTone models VSM4SK or VSUC4SK.
Please read and follow ALL installation instructions,
guidelines and precautions. Any deviation from these
instructions or miswiring combinations will cause the
unit to fail and all NuTone warranties will be void.
Following are the installation instructions for the VSC4S
Camera. Please refer to the installation instructions
and homeowners manual packed with the VSM4SK
or VSUC4SK when installation and operating these
models.
WARNING: 120 Volt AC power to the VSM4SK
rough-in and VSUC4SK monitor must remain
off until all system wiring and product mount-
ing at the monitor and camera is complete.
• Observe all local regulations and codes in your area.
• All screw terminals at the camera, VSM4SK or
VSUC4SK must be secure.
• Observe all color codes of wires when connecting cam-
era to VSM4SK or VSUC4SK.
• The VSC4S is designed to be used with category 5, or
category 6 cable (purchased separately).
The use of
cable other than category 5, or category 6 cable will
void all NuTone warranties and may result in faulty
installation and improper operation.
• The door camera must not be mounted in an area
that would be subject to direct sunlight or a strong
reflection from the sun.