NuTone VSUC4RK - Manuel (Page 16)

• Insert the remaining 3 mounting screws (supplied) and tighten.
• Complete all the connections on the back of the TV/Monitor, if they were not made before attaching the TV/Monitor
to the cabinet.
Using #8 Machine Screws and Threaded Mounting Shafts
• From underneath the cabinet, position the mounting hole template and mark the mounting hole locations.
• From underneath the cabinet, drill a 3/16" hole at each of the marked mounting hole locations. Counter sink holes
from inside cabinet to make screw head flush with cabinet surface.
• Measure the distance between the frame of the cabinet and the bottom of the cabinet. Combine the supplied 1/4",
1/2" and 3/4" round plastic spacers so they will fill the space between the bottom of the cabinet and the frame of
the cabinet.
• Depending on the depth of the cabinet, decide if you need to make all the connections to the back of the
TV/Monitor before fastening the TV/Monitor to the bottom of the cabinet.
• Select a 1 1/2", or 2 1/4" mounting screw (supplied) based on your particular installation. Insert all four (4) mount-
ing screws (supplied) from inside the cabinet.
16