NEC AccuSync 70 - Manuel (Page 13)

11
Specifications
Monitor AccuSync TM 50 Notes
Specifications Monitor
Picture Tube Diagonal: 15 inch 90 ° deflection, 0.28 mm trio dot pitch,
Viewable Image Size: 14 inch medium short persistence phosphor,
Radius: 1080 mm multi-layered, anti-static screen coating,
semi-tint screen, Invar Shadow Mask and
OptiClear
® screen surface.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Display Colors Analog input: Unlimited number of Colors Depends on display card used.
Synchronization Horizontal: 31 kHz to 70 kHz Automatically
Range Vertical: 55 Hz to 120 Hz Automatically
Resolutions Supported 640 x 480 @ 60 to 120 Hz Some systems may not support
Resolution based on horizontal and 800 x 600 @ 55 to 110 Hz all modes listed.
vertical frequencies only 832 x 624 @ 55 to 106 Hz
1024 x 768 @ 55 to 87 Hz ....................... NEC-Mitsubishi Electronics Display cites
1152 x 870 @ 55 to 77 Hz
recommended resolution at
1280 x 1024 @ 55 to 66 Hz 85 Hz for optimal display performance.
Active Display Area Horizontal: 270 mm/10.6 inches Dependent upon signal timing used,
(Factory Setting) Vertical: 203 mm/8 inches and does not include border area.
Active Display Area 280 mm/11 inches Dependent upon signal timing used,
(Full Scan) 210 mm/8.3 inches and does not include border area.
Power Supply AC 100 – 240V, 50-60 Hz
Current Rating 1.5A @ 100 – 240V
Dimensions 360 mm (W) x 380 mm (H) x 381 mm (D)
14.2 inches (W) x 15.0 inches (H) x 15.0 inches (D)
Weight 12.6 kg
27.8 lbs
Environmental Considerations
Operating Temperature: 0 °C to +35°C
Humidity: 30% to 80%
Feet: 0 to 10,000 Feet
Storage Temperature: -20 °C to +60°C
Humidity: 10% to 90%
Feet: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
AS507090.wpc 5/14/01, 11:22 AM 13