Navman iCN 320 - Manuel (Page 5)

5
2. Setting Up Your iCN 320 -
Using your iCN 320 for the first time
1. Position your iCN 320 in your vehicle as shown in your In-Car Installation Guide. Ensure that the GPS Antenna is pulled out to the horizontal position
and the Battery Switch is in the On position.
2. Press the Power button to turn on your iCN 320. The Language screen will display.
3. Use the 4-way toggle to choose your language; press the right Selection Button to progress.
4. Read the Warning message that is displayed.
5. If you agree with the Warning, select Accept by pressing the right Selection Button.
6. The Welcome screen will open. Press the right Selection Button to proceed to setting your preferences.
7. You can set your iCN 320 to provide spoken instructions in either a male or female voice. Select your preferred option by using the left and right
buttons on the 4-way toggle, then press the OK button. When you have selected your preferred option, press the right Selection Button to Save. The
Display screen will open.
8. Using the Display screen, you can set your time and distance preferences:
• To set your Time Zone, press the left and right buttons on the 4-way toggle to set the number of hours difference between your time zone
and UTC (GMT).
• Use the 4-way toggle and the OK button to set your iCN 320 to display the time in 12 or 24 hour format
• If you have set UK English or US English as the Language, you can use the 4-way toggle to set whether your iCN 320 will display distances in
miles or kilometers.
• When you have set your preferences, press the right Selection Button to continue.
9. You can move back to any of the earlier screens by pressing the left Selection Button. Press the right Selection Button to open the Go To screen. You
can access your preferences at any time from the Go To screen by pressing the right Selection Button.
NOTE: If you do not accept the Warning, your iCN 320 will turn off.