Open lid, Lighting instructions – Napoleon Grills CSS610RB Manuel d'utilisation

Page 6

Advertising
background image

6

Open lid.

Main Burner Lighting

Push in on any main burner

knob and turn to “HI”. A

click should be heard from

the valve, sending a spark

to light the pilot flame.

If ignition is not immediate,

turn burner control off.

Wait 5 minutes.

Ensuring all burner controls

are in the off position,

slowly turn on the gas

supply valve.

RIGHT

BURNER

LEFT

BURNER

REAR BURNER IGNITER

The propane cylinder is equipped with an excess flow device. Unless all burners are turned
off prior to turning the cylinder on, only small flames and low heat will be achievable.

Rear Burner Lighting

Remove warming rack.

(the excess heat will

cause the rack to warp.)

Push the knob and hold

for approximately 5

seconds before rotating.

This allows gas to reach

the rear burner. Rotate

the knob to “HI” and press

the igniter button.

If ignition is not immediate,

turn burner control off.

Wait 5 minutes.

REAR

BURNER

CENTRE

BURNER

LIGHTING INSTRUCTIONS

If the burner will not light

after several attempts, it

can be lit by inserting a lit

extended match or lighter

through the cooking grids

to the burner. Push the

knob in and turn to “HI”.

If the burner will not light

after several attempts, it

can be lit by holding a lit

extended match or lighter

against the burner. Push

the knob in and turn to “HI”.

Advertising