Cleaning, Digital clock timer – Proctor-Silex 840107400 Manuel d'utilisation

Page 4

Advertising
background image

7

Cleaning

To maintain the performance of your coffeemaker, clean your
coffeemaker once a month.

To Clean the Inside of the Coffeemaker:
1.
Place empty carafe on Keep-Hot Plate. Close empty brew

basket.

2. Pour one pint of plain white vinegar into the reservoir.
3. Plug unit into electrical outlet and turn ON.
4. After 30 seconds turn OFF.
5. Wait 30 minutes to allow the vinegar to clean. Then turn

ON again. When the brew cycle is finished, turn OFF.

6. Empty carafe and rinse. Pour one carafe of cold tap water

into the reservoir. Place carafe on Keep-Hot Plate.

7. Turn ON. When the brew cycle is finished, empty the carafe.

Repeat this process with one more carafe of cold tap water.

8. Turn OFF when complete.
9. Wash carafe and brew basket before making a beverage.

To Clean Carafe and Filter Basket:
Wash carafe by hand in hot, soapy water or in top rack of
dishwasher. To remove the carafe lid push the hinge part of
the lid to one side then gently but firmly twist the lid. The pin
will release from the hinge. To replace the lid, put one side of
the lid hinge on one of the pins, then snap onto the other pin.

To remove the brew basket, swing open and lift straight up.
The brew basket may be washed by hand or in top rack of
dishwasher.

6

Digital Clock Timer

(on selected models)

To Set Clock:
1.
Plug in coffeemaker.

Numbers on the
clock will flash until
you set time of day.

2. To set time of day, press h. (hour) button to establish

current hour. A red dot will glow to indicate PM hours. If
this dot is not glowing, clock is set for an AM hour.

3. Press m. (minute) button until you reach the current time.

To Set and Use Automatic Brew:
1.
Make sure clock is set for correct time of day.
2. Fill coffeemaker with desired amount of water and coffee.

Place carafe with lid on keep-hot plate.

3. While holding Prog. (program) button, press h. and m.

buttons until desired brewing time is reached.

4. Once brewing time has been set, follow this procedure

each day to reset the Automatic Brew:
A. Switch must

be in Off
position.

5. The Automatic Brew indicator dot on clock will glow.
6. Brew cycle will begin at set time.

PM Indicator

B. Then slide

to Auto.

840107400 ENv03.qxd 12/9/02 1:30 PM Page 6

Advertising