Phoenix Gold Coaxial Loudspeaker V6.5 - Manuel (Page 2)

Phoenix Gold - www.phoenixgold.com
Ryval ®Speakers
Coaxial Loudspeaker Owner’s Manual
BASIC INSTALLATION
Selecting the placement of your new Ryval Coaxial speakers could be as easy as using the existing factory locations or may
require you to create a new location. Speaker placement in the door, dash, or rear deck is the most common. See your local
Phoenix Gold Dealer for additional location and mounting assistance.
DOORS /REAR DECK
1.
Many vehicles already have factory locations (Figure 1.) to house the “DROP IN” feature of the Ryval Coaxial line. If no
existing locations are available or are not used, check the desired location for adequate cutout area and any
depth obstructions. Make sure to allow suffi cient clearance for window tracks, structural braces, trunk lid springs, etc.
2. Assuming enough area and depth is available, use the provided template and trace the speaker cutout and mounting
holes onto the surface of the mounting location.
3. If the mounting surface is not structurally strong enough to accommodate screws, (i.e. plastic, cardboard) use the pro
vided speed clips which will act as a nut for the supplied screws.
4. Always provide water protection, if not supplied in the vehicle. We suggest using a rain shield or equivalent. If in doubt,
please contact your Phoenix Gold Dealer.
SPEAKER INSTALLATION WITHOUT GRILL
When installing your new coaxial speakers in the fac-
tory locations there may not be room enough to use the
provided Ryval grills. Don’t worry; these speakers perform
just as well behind the factory grill.
SPEAKER INSTALLATION WITH GRILL
For more custom applications, or cases where the factory
grill will not be used, a high excursion protective grill has
been provided. Please read the section above on installa-
tion for concerns about custom installations.