Panasonic WV-LD2000 - Manuel (Page 10)

10
INSTALLATIONS
WARNING
The installations described in the figures should be
made by qualified service personnel or system
installers.
Caution: Attach this monitor to a flat wall with a locally pro-
cured mounting bracket. After the installation, secure
the monitor to prevent dropping.
Places to be avoided
• Very dirty and dusty places
• Places subject to strong vibrations
• Humid places
• Places where drastic temperature changes occur
• Places which are not level
• Steamy and oily places such as kitchens
■ Removing the Monitor Stand
Before mounting the monitor on the wall, remove the moni-
tor stand.
1. Remove the screw of stand cover (M4), and then
remove the stand cover.
2. Remove the four screws of monitor stand, and then
remove the monitor stand.
■ Mounting on the Wall
To mount the monitor on the wall, a mounting bracket
(locally procured, VESA standard 100 mm {3-9/10"} pitch)
and screw (M4, locally procured) are required.
Notes:
• Do not block the ventilation opening or slots on the
cover.
• Do not mount the monitor on places subject to constant
vibrations. That may cause trouble or damage.
• Do not install the AC adapter into the wall. That may
cause temperature to rise.
Screw (4)
Screw (4)
Stand cover
Monitor stand
Screw holes for VESA mounting bracket
(100 mm {3-9/10"} pitch)
Screws
(M4, locally procured)
Mounting bracket
(locally procured)