Panasonic WV-LD2000 - Manuel (Page 9)

9
!3 Audio output connector (AUDIO OUT)
Supplies an audio signal accepted by the AUDIO IN
connector to another external device.
!4 S-video input connector (S-VIDEO IN)
Accepts an S-video signal from an external device.
Note: This connector and the VIDEO-B IN connector is
connected to the same device. When an S-video
signal and composite video signal are supplied
from a device at the same time, the S-video signal
is accepted by priority.
!5 Video input B connector (VIDEO-B IN)
Accepts a composite video signal from an external
device.
!6 Video output B connector (VIDEO-B OUT)
Supplies a composite video signal accepted by the
VIDEO-B IN connector to another external device.
!7 Video input A connector (VIDEO-A IN)
Accepts a composite video signal from an external
device.
!8 Video output A connector (VIDEO-A OUT)
Supplies a composite video signal accepted by the
VIDEO-A IN connector to another external device.
!9 Security slot
You can attach a lock that meets the industry standard
specification (3 to 3.26 mm x 7 to 7.26 mm x 3.5 to
4 mm) {0.12" x 0.28" x 0.15"}.
Timing data chart for PC input
This monitor supports the timing data listed as follows.
Notes:
• If an input signal does not meet the standards (dot clock frequency, horizontal frequency, and vertical frequency), "OUT
OF RANGE" will appear on the screen.
• This monitor does not support plug-and-play.
Standard Resolution Dot clock
frequency (MHz) Horizontal
frequency (kHz) Vertical
frequency (Hz)
59.93 31.46 25.17 640 x 480 Industry
72.81 37.86 31.50 640 x 480 VESA (Video Electronics
Standards Association)
75.00 37.50 31.50 640 x 480