Philips 150B2B - Manuel (Page 34)

Horizontal flicker appears
Push the Auto button. ●
Eliminate the horizontal bars using the Phase Adjustment of
VIDEO NOISE in OSD Main Controls. ●
The screen is too bright or too dark
Adjust the contrast and brightness in OSD Main Controls. (The
backlight of the LCD monitor has a fixed life span. When the
screen becomes dark or begins to flicker,
please contact your
dealer.
●
An after-image appears
If an image remains in the screen for an extended period of time,
it may be imprinted in the screen and leave an afterimage This
usually disappears after a few hours ●
An afterimage remains after the power has
been turned off.
This is characteristic of liquid crystal and is not caused by a
malfunction or deterioration of the liquid crystal. The afterimage
will disappear after a set amount of time ●
Green, red, blue, dark, and white dots
remains The remaining dots are normal characteristic of the liquid crystal
used in today’s technology. ●
For further assistance, refer to the Consumer Information Centers list to contact your local Philips distributor.
RETURN TO TOP OF THE PAGE
Troubleshooting
file:///D|/Grace/03115/english/150b2b/safety/saf_troub.htm (2 of 2) [11/30/2001 1:39:27 PM]