Pioneer PDA-5003 - Manuel (Page 30)

27
En
PICTURE/SCREEN Adjustment
English
PICTURE/SCREEN Adjustment
PICTURE adjustment
MENU
2/3
5/∞
SET
1 Press the MENU button to display the menu
screen.
MENU INPUT1
PICTURE SCREEN SETUP OPTION
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
PICTURE RESET
ENTER SET EXIT MENU
: 0
: 0
: 0
: 0
: 0
2 Use the 5/∞ buttons to select the adjustment
item, then press the SET button.
SET MENU
MENU INPUT1
SCREEN SETUP OPTION
ENTER EXIT
PICTURE RESET
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
: 0
: 0
: 0
: 0
: 0
PICTURE
3
Use the 2/3 buttons to adjust the picture quality
as desired.
: 0 BRIGHTNESS
SET SET EXIT MENU
4 Press the SET button.
Pressing the SET button writes the value into the
memory and returns the display to the step 2 screen.
5 When the setup is finished, press the MENU
button to exit the menu screen.
Note
Make these adjustments for each input (INPUT1 to INPUT5) and
signals.
[PICTURE] mode adjustment items
Below are brief descriptions of the options that can be set
in the [PICTURE] mode.
CONTRAST ············· Adjust according to the surrounding
brightness so that the picture can be
seen clearly.
BRIGHTNESS ·········· Adjust so that the dark parts of the
picture can be seen clearly.
COLOR ···················· Adjust to the desired depth (Setting
to a slightly deep color will create a
natural looking picture).
TINT ························· Adjust so that flesh tones look
normal.
SHARPNESS ··········· Normally set to the center position.
To create a softer picture, set to the
left of center. To create a sharper
picture, set to the right of center.
Note
Consult the Operating Instructions for your Plasma Display
regarding PICTURE adjustment when inputting computer signals.
To reset [PICTURE] mode settings to the default
If settings have been adjusted excessively or the picture
on the screen no longer appears natural, it may prove
more beneficial to reset the [PICTURE] mode to default
settings instead of trying to make adjustments under
already adjusted conditions.
1
In step 2 in the previous procedure, use the 5/∞
buttons to select [PICTURE RESET], then press the
SET button.
SET SET EXIT MENU
PICTURE RESET
YES NO
2
Use the 2/3 buttons to select [YES], and press
the SET button.
All [PICTURE] mode settings are returned to the
factory set default.
Display operating
panel Remote control unit
MENU
5/∞
SET
2/3