LifeSource UA-787W - Manuel (Page 12)

Auto Control Medical (Toll Free): 1-800-461-0991 E-6
TAKING yOUR BLOOD PRESSURE
Press the START button. The average reading (see Pg. E-9) is displayed, the 4.
cuff pressurizes, measurement will begin and the Cuff Inflation Meter will
show on the display screen. It is normal for the cuff to feel very tight.
NOTE: If an appropriate pressure is not obtained, the device
automatically starts to inflate again.
CAUTION: If you wish to stop inflation at any time, press the START
button again.
When the measurement is complete, the systolic and diastolic pressure read- 5.
ings and pulse rate are displayed. The cuff deflates and the monitor automati-
cally shuts off after 60 seconds, or you can turn it off by pressing the START
button. Your measurement is automatically stored in memory (the monitor
can store up to 90 readings in memory).
Remove cuff and make note of your blood pressure and pulse rate on the 6.
Blood Pressure Record chart in the back of the manual, indicating the date
and time of measurement.
IMPORTANT: Measure blood pressure at the same time each day.
SYSTOLIC
DIASTOLIC
PULSE