KITCHENAID Slide-out Vent Hood - Manuel (Page 9)

9
Operating of vent hood
For best results, turn vent hood
fan on at beginning of cooking
and allow it to run until all smoke
and odors are removed from
room.
To turn fan ON:
Slide glass shelf forward. Press
the fan “speed” button for the
desired speed. Speed may be
increased, decreased, or turned
off anytime during vent hood
operation. The indicator light next
to “speed” button selected
should be on when the fan is
running.
To turn fan OFF:
Press the “0” button or close the
glass shelf. The fan will shut off
when glass shelf is about 2"
(5.1 cm) from the closed position.
When the glass shelf is opened,
the fan will operate at the last
setting.
To turn vent hood light ON:
Open the glass shelf about 1"
(2.5 cm). Press the “light” button.
The light will be on each time the
glass shelf is opened. The light
can be used for a night light by
opening the glass shelf about
1" (2.5 cm).
To turn fan ON:
Slide glass shelf forward. Move
the “fan” switch to “1”. Move the
“speed” switch to desired setting.
The speed may be increased,
decreased, or turned off anytime
during vent hood operation. The
“indicator” light should be on
when the fan is running.
To turn fan OFF:
Move the “fan” switch to “0” or
close the glass shelf. The fan will
shut off when glass shelf is about
2" (5.1 cm) from the closed
position. When the glass shelf is
opened, the fan will operate at
the last settings.
To turn vent hood light ON:
Open the glass shelf about 1"
(2.5 cm). Move the “light” switch
to the “1” position. The light will
be on each time the glass shelf is
opened. The light can be used for
a night light by opening the glass
shelf about 1" (2.5 cm).
To turn vent hood light OFF:
Move the “light” switch to the “0”
position. Or close the glass shelf.
For 30" (76.2 cm) model series
KWVU205 & YKWVU205:
Part No. 4360201 (white)
Part No. 4360203 (black)
Part No. 4392855 (biscuit)
For 36" (91.4 cm) model series
KWVU265 & YKWVU265: :
Part No. 4360202 (white)
Part No. 4360204 (black)
Part No. 4392856 (biscuit)
Non-Vent (recirculating) Kit:
Part No. 883140 – fits all models
For 30" (76.2 cm) model series
GZ7730 & YGZ7730:
Part No. 4396067 (white)
Part No. 4396066 (black)
Part No. 8171368 (biscuit)
For 36" (91.4 cm) model series
GZ7736 & YGZ7736: :
Part No. 4396069 (white)
Part No. 4396068 (black)
Part No. 8171369 (biscuit)
Accessories
available from your dealer
Exterior surfaces
Clean the vent hood with a mild
detergent and soft cloth. Do Not
use abrasive cleansers or steel
wool pads.
Filters
For best results, clean filters often.
Pull tabs downward to remove
filters. Place filters in dishwasher
or hot sudsy water to clean.
1. Remove screws above light
cover and set aside.
2. Pull light cover forward slightly
and then downward to remove
cover.
3. Replace light bulb. Use a
15-watt fluorescent bulb with 30"
(76.2 cm) unit and 18-watt bulb
with 36" (91.4 cm) unit.
4. Lift cover back into position.
Replace screws.
screws
Note: Instructions are included with each kit.
Front trim kit – matches the front panel color to range or cooktop color.
screws
Replacing the bulb
KWVU and YKWVU model series:
KWVU and YKWVU model series:
GZ and YGZ model series:
GZ and YGZ model series:
light button speed buttons
light switch fan switch
indicator
light
speed
switch
To turn vent hood light OFF:
Press the “light” button to turn
the light off. Or close the glass
shelf.