Changing a cycle or setting, Adding items during a cycle, Option selections – KITCHENAID KUDI25CH Manuel d'utilisation

Page 13

Advertising
background image

13

Changing a Cycle or Setting

During the first minute of a cycle

Press a new cycle and/or options.

After the first minute of a cycle

1. Press

CANCEL glows. The dishwasher pauses for 5 seconds
and starts a 2 minute drain (if needed). Let the
dishwasher drain completely.

2. Check the detergent dispensers. If the main wash cup

has opened and the detergent washed away, refill the
cups as needed.

3. Close the door.

4. Press a new cycle and/or options.

5. Press START.

Adding Items During a Cycle

You can add an item anytime before the main wash starts.
Open the door and check the detergent dispenser. If the
main wash section is still closed, you can add items.

To add items

1. Lift up the door latch to stop the cycle. Wait for the

spraying action to stop before opening the door.

2. Open the door. If the main wash detergent dispenser is

still closed, add the item.

3. Close the door firmly until it latches. The dishwasher

resumes the cycle after about a 5 second pause.

Option Selections

You can customize your cycles by pressing an option. If
you change your mind, press the option again to turn the
option off. Select a different option if desired.

You can change an option anytime before the selected
option begins. For example, you can press an unheated
drying option any time before drying begins.

Press START to use the same cycle and options as the
previous wash cycle.

NOTE: If the last cycle you completed was a rinse cycle,
when you press Start, the dishwasher runs the last full
wash cycle and options.

SUPER SCRUB

TM

option

Select this high-temperature option for improved cleaning
of heavily soiled dishes. Selecting this option adds heat
and wash time to the wash cycle. Heating the water helps
improve washing results.

NOTE: Super Scrub is an option with Soak & Scrub and
Normal cycles.

High Temp Wash (on some models)

Select this option to heat the water to 140°F (60°C) in the
main wash cycle. Selecting this option adds heat and
wash time to the Normal cycle. Heating the water helps
improve washing results

NOTE: The Soak & Scrub cycle automatically uses this
option. High Temp Wash is an option with the Normal
cycle.

Energy Saver Dry

Select this option to dry dishes without heat and save
energy. Energy Saver Dry is useful when loads contain
plastic dinnerware that may be sensitive to high
temperatures.

The dishes take longer to dry and some spotting can
occur. For best drying, use a liquid rinse aid. Some items
(such as plastics) may need towel drying.

NOTE: Light/China (on some models) and Rinse Only
automatically use this option. Energy Saver Dry is an
option with all other cycles.

Advertising