Sing your cooktop, Using the dual-size surface unit, Hot surface indicator lights – KITCHENAID KECC562G Manuel d'utilisation

Page 10

Advertising
background image

10

Using the dual-size surface unit

KECC568G, YKECC568G, KECC508G,
YKECC508G, KECC502G, YKECC502G,
KECC507G, YKECC507G, KECC562G,
KECC567G, YKECC567G, KECC507H,
KECC563H and KECC567H

You can use the right rear and left front
surface units as either small diameter, lower

wattage elements or large diameter, full
wattage elements.

Right rear surface unit:

Left front surface unit:

Use both elements
for larger pans

Use small element
for smaller pans

Use both elements
for larger pans

Use inner element
for smaller pans

OFF

H

I

S

IN

G

L

E

LO

LO

D

U

A

L

H

I

REAR

OFF

H

I

S

IN

G

L

E

LO

LO

D

U

A

L

H

I

REAR

HOT

Until you get used to the settings, use the
following as a guide.
For best results, start
cooking at the high setting; then turn the
control knob down to continue cooking.

SETTING

HI

MED-HI or 6-8

MED or 5

MED-LO or 2-4

LO

RECOMMENDED USE

To start food cooking.

To bring liquid to a boil.

To hold a rapid boil.

To quickly brown or
sear meat.

To maintain a slow boil.

To fry poultry or meat.

To make pudding,
sauce, or gravy.

To stew or steam food.

To simmer food.

To keep food warm.
Set the heat higher or
lower within the LO
(or 1) band to keep
food at the
temperature you want.

To maintain liquid just
below simmer.

To melt chocolate or
butter.

U

sing Your Cooktop

To use the small or inner element
(for smaller pans):

Push in and turn the control knob to the
left (counterclockwise) to the desired
setting in the area marked “SINGLE”.

To use both elements (for larger pans):

Push in and turn the control knob to the
right (clockwise) to the desired setting in
the area marked “DUAL”.

NOTE: You can turn the control knob in
either direction to reach “OFF”.

Hot surface indicator lights

The Hot Surface Indicator Lights in the lobe
at each control will glow when the surface
units get hot. The Indicator Lights will
continue to glow as long as the surface
units are too hot to touch, even after they
are turned off.

REMEMBER: When cooktop is in use, the entire cook-
top area may become hot.

3192800Av08 5/3/00 1:41 PM Page 10

Advertising
Ce manuel est liée aux produits suivants: