Kenwood KNA-DV2100 - Manuel (Page 6)

PRK SW
REVERSE
S SENS
TEL MUTE
ILLUMI
To car light control switch
Ignition wire (Red) 12 V
Battery wire (Yellow) 12 V
Ground wire (Black) - (To car chassis)
If no connections are made, do not let the wire come out from the tab.
Automatic illumination control wire (Orange)
To reverse lamp harness of car
Connect to the TEL mute terminal for the navigation
system of the KENWOOD car audio. TEL mute wire (Brown)
Ignition key switch ACC
Battery
Reverse detection wire (Pink)
Car fuse box (Main
fuse)
Car fuse box
NOTE
To the car speed signal harness
To parking brake detection switch harness of car
• Do not cut off the holder marked "S SENS" (containing a protection diode) of the car
speed signal detection wire H (White). Doing so will cause a fault with the car.
• Please contact your dealer for information about the connection method. A connection
error will lead to car breakdown.
2WARNING
S SENS
Car speed signal wire (White)
Wiring harness G
Car speed signal intermediate wire H (White)
Parking sensor wire (Green)
E
For the sake of safety, be sure to connect the parking sensor wire.
2WARNING
(3A)
(5A)
11
Connection
10