KITCHENAID KFRU368TSS - Manuel (Page 37)

37
Cabinet Door Alignment - Style 2
(internal hinge) Only
Your cabinet doors can be realigned if necessary.
1. Check door to determine alignment requirements.
2. Open the cabinet door.
3. Locate and loosen the 4 door hinge mounting screws ½ turn.
4. Adjust the top or bottom of the door in the direction
necessary to align the door.
5. Tighten the 4 door hinge mounting screws.
6. Close the door and check alignment.
7. Readjust the door using Steps 2 through 6 if necessary.
8. Repeat Steps 1 through 7 on the other door if necessary.
Cabinet Door Removal
The door(s) can be removed if necessary to gain access to the
inside of the cabinet area below the grill.
Style 1 (external hinge pin)
To Remove the Door:
1. Open the door.
2. Lift door to slide door hinge pins from hinge brackets on
cabinet.
3. Repeat steps 1 and 2 for the other door if necessary.
To Replace the Door:
1. Position hinge pins on the door with the hinge brackets on
the cabinet. Gently push down to slide the pins into place.
2. Repeat Step 1 for the other door if necessary.
Style 2 (internal hinge)
To Remove the Door:
1. Open the door to the full open position.
2. Locate and remove the 4 door hinge mounting screws
3. Pull the door away from the center to slide the door hinges
out of the slots in the frame.
4. Repeat Steps 1 through 3 for the other door if necessary.
A. Top screws (2 - underside of frame)
B. Bottom screws (2)
A. Door hinge pin
B. Hinge bracket
A
B
A
B
A. Door hinge pin
B. Hinge bracket
A. Top screws (2 - underside of frame)
B. Bottom screws (2)
A
B
A
B