Sony SCD-XB940 - Manuel (Page 11)

Playing Discs
11 GB
Playing a Disc
The operations for normal play and the basic operations
during play are explained below.
1
Turn on the amplifier. Turn down the volume level
to the lowest.
2
Select the player position using the input selector
on the amplifier.
3
Press POWER to turn on the player.
4
Press A to open the disc tray, and place a disc on
the tray.
5 Press SACD/CD on the remote to select the SACD or
CD.Z
Each time you press the button, the SACD or CD
appears alternately in the display. Select the type of
disc on the tray. For details, see page 10.
6 Press H.
Playback starts from the first track. If you want to start
playing from a specific track, turn lAMSL to
select the track number before pressing H.
7
Adjust the volume on the amplifier.
CD layer
HD layer
Super Audio CD + CD (Hybrid disc)
This disc consists of an HD layer and a CD layer. Press
SACD/CD to select the layer you want to listen to. Also,
as the dual layers are on one side, it is not necessary to
turn the disc over. You can play the CD layer using a
conventional CD player.
Incompatible Discs
This player cannot play the following discs. If you try to
play them, the error message “TOC Error” or “NO DISC”
will appear or there will be no sound.
• CD-ROM
• CD-R
• CD-RW
• DVD, etc.
SACD/CD
lAMSL POWER A H X x
With the label side up