Schwinn 240 - Manuel (Page 15)

To start a Profile Program:
1. Step on the machine.
2. Use the Increase or Decrease buttons to select a user (guest or custom) and push START/ENTER.
3. Use the Increase or Decrease buttons to select one of the above programs. Push START/ENTER.
4. Use the Increase and Decrease buttons to answer the setup questions. Push START/ENTER to record
your answers.
Note: The default value for TIME is 30:00. The default start value for LEVEL is 8 .
5. Push the START/ENTER button to start the profile workout.
Changing Resistance Levels
Push the Increase or Decrease buttons to change the resistance level at any time in a workout program.
Fitness Test
The Fitness Test measures the improvements of your physical fitness level. The test compares your power output (in Watts) to your
heart rate. As you become more fit you will produce more power (Watts) at a given heart rate.
When the test starts, the power (Watts) slowly increases. This means you will work harder, and as a result, your heart rate
increases. The Watts continue to increase automatically until your heart rate reaches the “Test Zone.” This zone is individually
computed to be near 75 percent of your maximum heart rate. When you reach the Test Zone your machine holds the Watts steady
for 3 minutes. This lets you reach a stable condition (where your heart rate becomes steady). At the end of the 3 minutes, the
Console measures your heart rate and the power output (Watts). These numbers, along with information about your age and
weight, are computed to produce a “Fitness Score”.
Note: Fitness Test scores should only be compared to your previous scores and not other users.
Over time, you will output more Watts of power at a certain Heart Rate. Compare your Fitness Scores to see your improvement.
Heart Rate Control (HRC) Program
The Heart Rate Control (HRC) program lets you set a heart rate goal for your workout. The program monitors your heart rate in beats
per minute (BPM) from the Contact Heart Rate (CHR) sensors on the machine or from a Heart Rate Monitor (HRM) chest strap.
Note: The console must be able to read the heart rate information from the CHR sensors or HRM for the HRC
program to work correctly.
If you go to the HRC program from your User profile, the Target Heart Rate program uses your age and other user setup information
to set the Heart Rate Zone values for your workout. If you are a Guest User, you must enter your age and weight. The console
display then gives prompts for you to set up your workout:
1. Set the workout level: FIT (beginner) or GETTING FIT (advanced).
2. Set the percentage of maximum heart rate: 60–70%, 70–80%, 80–90%.
Consult a physician before you start to exercise in the 80–90% heart rate zone.
3. Set the Time for the workout. (The default value is 10:00.)
For more detailed information about fitness zones, please refer to the fitness information on our website:
www.schwinnfitness.com
Distance Goal
The Distance Goal Program lets you set the total Distance and Pacer Speed for your workout. If you are a Guest User, you must
enter your weight. The console display then gives prompts for you to set up your workout:
1. Enter the distance with the Increase/Decrease buttons (default is 20 mi/ 20 km). Push START/ENTER.
2. Enter the pacer speed with the Increase/Decrease buttons (default is 25 mph/ 25 km/h). Push
START/ENTER.
15 15 15