Self-diagnosis function, Specifications, Preset mode timing table – Sony CPD-E210 Manuel d'utilisation
Page 16: Back cover), Back cover) if, R (back cover). ev
D:\###sagyou\02 gatu\0203-ya\874120S CPD-E210\01US03BAS-UC.fm
masterpage:Left
CPD-E210
4-077-098-11 (1)
Sony Corporation
Printed in Mexico
Printed in Thailand
Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer, the screen will go
blank and the
1 (power) indicator will either light up green or
flash orange. If the
1 (power) indicator is lit in orange, the
computer is in power saving mode. Try pressing any key on the
keyboard.
If the
1
(power) indicator is green
1
Disconnect the video input cable or turn off the
connected computer.
2
Press the
1
(power) button twice to turn the monitor
off and then on.
3
Move the control button
,
for 2 seconds before the
monitor enters power saving mode.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cable and check
the condition of your computer.
If the color bars do not appear, there is a potential monitor failure.
Inform your authorized Sony dealer of the monitor’s condition.
If the
1
(power) indicator is flashing orange
Press the
1
(power) button twice to turn the monitor off
and then on.
If the
1 (power) indicator lights up green, the monitor is working
properly.
If the
1 (power) indicator is still flashing, there is a potential
monitor failure. Count the number of seconds between orange
flashes of the
1 (power) indicator and inform your authorized
Sony dealer of the monitor’s condition. Be sure to note the model
name and serial number of your monitor. Also note the make and
model of your computer and video board.
Specifications
CRT
0.24 mm aperture grille pitch (center)
17 inches measured diagonally
90-degree deflection
FD Trinitron
Viewable image size
Approx. 327
×
243 mm (w/h)
(14
3
/
4
×
9
5
/
8
inches)
16.0" viewing image
Resolution
Maximum
Horizontal: 1600 dots
Vertical: 1200 lines
Recommended
Horizontal: 1024 dots
Vertical: 768 lines
Standard image area
Approx. 312
×
234 mm (w/h)
(12
3
/
8
×
9
1
/
4
inches)
Deflection frequency*
Horizontal: 30 to 85 kHz
Vertical: 48 to 120 Hz
AC input voltage/current 100 to 240 V, 50 – 60 Hz, Max. 1.7 A
Power consumption
120 W
Dimensions
Approx. 404
Ч
413.5
Ч
419.5 mm (w/h/d)
(16
Ч
16
3
/
8
Ч
16
5
/
8
inches)
Mass
Approx. 20 kg (44 lb 1 oz)
Plug and Play
DDC1/DDC2B/DDC2Bi
Supplied accessories
* Recommended horizontal and vertical timing condition
• Horizontal sync width should be more than 1.0 µsec.
• Horizontal blanking width should be more than 3.0 µsec.
• Vertical blanking width should be more than 500 µsec.
Design and specifications are subject to change without notice.
Preset mode timing table
MENU
RESET
1
(power) indicator
MENU
No. Resolution
(dots
×
lines)
Horizontal
Frequency
Vertical
Frequency
Graphics
Mode
1
640
×
480
31.5 kHz
60 Hz
VGA-G
2
640
×
480
43.3 kHz
85 Hz
VESA
3
720
×
400
31.5 kHz
70 Hz
VGA-Text
4
800
×
600
53.7 kHz
85 Hz
VESA
5
832
×
624
49.7 kHz
75 Hz
Macintosh 16"
Color
6
1024
×
768
60.0 kHz
75 Hz
VESA
7
1024
×
768
68.7 kHz
85 Hz
VESA
8
1280
×
1024
80.0 kHz
75 Hz
VESA
01US01COV-UC.book Page 16 Thursday, February 3, 2000 4:06 PM