Samsung DVD-1080PR - Manuel (Page 17)

English _17
●
CONNECTIONS
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier.(See pages 49 to 50)
- The position of jacks may vary depending on the Amplifier.
Please refer to your Amplifier’s user's manual.
Connecting to an Audio System (2 Channel Amplifier)
1
Using the audio cables, connect the AUDIO (red and white)
OUT jacks on the rear of the DVD player to the AUDIO (red
and white) IN jacks of the Amplifier.
2
Using the video signal cable(s), connect the HDMI,
COMPONENT or VIDEO OUT jacks on the rear of the DVD
player to the HDMI/DVI, COMPONENT or VIDEO IN jack of
your TV as described on pages 12 to 16.
3
Turn on your DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select the audio
input your DVD player is connected to in order to hear sound.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
RED
WHITE
RED WHITE
2-Channel stereo amp
Audio Cable
(Included)