Channel – Samsung DCB-H360R Manuel d'utilisation
Page 14
GB-25
DCB-H360R
GB
GB-24
D
I
G
I
T
A
L
C
A
B
L
E
R
E
C
E
I
V
E
R
DCB-H360R
GB
2.2 Favorite Channels
You can immediately register the present channel to the desired
Favorite Group.
In addition, you can register a channel to multiple favorite groups.
●
Select the desired Favorite Group(FAV1~FAV4) using the
FAV.CH
key.
●
Select the desired channel list using the
❷✓➐
or numeric keys
at the
TV
or
RADIO
list window.
●
Press the
RED
key and then register the selected
channel at the Favorite Group.
●
Then press the
OK
key for confirmation.
You can change TV list or Radio list by the
TV/RADIO
key and change favorite list
by the
FAV.CH
key.
●
When you press the
TV/RADIO
key, TV list and Radio list are toggled.
●
Press the
FAV.CH
key to select another favorite list.
●
Press the
EXIT
key to exit the menu.
To delete channels from Favorite Group:
●
Select a channel list to delete with the
❷✓➐☎
keys.
●
Press the
RED
key to delete the selected channel from the favorite channels.
●
Press the
EXIT
key to exit the menu.
N
No
otte
e
: One favorite list can contain max 200 channels.
2.3 Set Channel Lock
●
Select the TV or RADIO channel window by pressing the
➛✓❿☎
keys.
●
Focus the channel by pressing the
❷✓➐☎
keys.
●
Select the channel lock by pressing the
RED
key.
●
Press the
OK
key for confirmation.
This will lock the channel. Whenever you need to view the
channel, you will have to enter the PIN Code at the request
window.
To cancel the lock:
●
Press the
RED
key again in order to cancel the lock.
●
Press the
EXIT
key to exit the menu .
.
OPERATING THE RECEIVER
1.3 Reset to Factory Defaults
This is to recover the Factory set values in case the user has
encountered some problems after changing any values of
channel data and others which may be in error.
The screen display will be as follows:
At the request window, if you press the
OK
key, the receiver
will be reset to factory default settings automatically.
N
No
otte
e
: This causes your previous settings to be deleted!
All settings and information including channel data will
be deleted.
●
Press the
EXIT
key to exit the menu .
1.4 Software Update
This option is enabled only if your cable provider sends software for your STB.
To upgrade the software, place the cursor on
Installation
❿ Software Update
menu and
press the
OK
key. If new software is available, banner “Start Software Updating Process ?”
will be displayed. There is also information about estimated time of software download.
Press the
OK
key to confirm and start Software Updating process.
If there is newest software on your STB “You don’t need to update software !” will be displayed.
N
No
otte
e
: STB automatically reboots for software upgrading process. During the upgrading
process, TV screen will remain blank for approximately 10 minutes. Window display at
the STB front panel will show the progress. Service will be resumed automatically after
the upgrade is completed.
●
Press the
EXIT
key to exit the menu.
2. Channel
The “
Channel
” menu has three functions:
Saving changes on channel list by select Update List and it
provides making four favourite lists and set channel lock,
as you want.
●
Enter the
PIN Code.
If you have not entered your own PIN Code,
0000
applies which
was set at the factory.
2.1 Update List
When some new channels will be transmitted to your cable
network, these channels would be shown on channel list
green colored. To save these channels, use
Channel
❿
❿☎☎Update
List.
OPERATING THE RECEIVER
DCB_H360R draft 0604 eng 06/4/06 07:39 Page 24