Rack dry (optional part), Installing the drying rack – Samsung DV220AE* Manuel d'utilisation

Page 23

Advertising
background image

operating Instructions, tips

_23

RACK DRY (OPTIONAL PART)

Installing the drying rack

1. Open the Dryer door.
2. Position the drying rack in the tumbler, placing the front lip of the drying rack on the top of

the lint filter.

3. Place the rear legs in the two recessed areas of the dryer’s back wall, then push down the

middle of the drying rack to fix.

4. Place the items to be dried on the rack, leaving space between them so air can circulate.
5. Close the Dryer door.
6. Use the Time Dry cycle. Select the time according to the moisture and weight of the items.

Start the Dryer. It may be necessary to reset the timer if a longer drying time is needed.

SUGGESTED ITEMS

SUGGESTED TEMP. SETTINGS

Washable sweaters
(block to shape and lay flat on rack)

Low or Extra Low

Stuffed toys
(cotton or polyester fiberfilled)

Low or Extra Low

Stuffed toys
(foam or rubber-filled)

Air Fluff

Foam rubber pillows

Air Fluff

Sneakers

Air Fluff or Heat (Extra Low)

Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the item and
lead to a fire hazard.

Drying Rack is not supplied in this model. The Drying Rack is optional. You can purchase it
through a service center. (Part Code : DC61-02773A)

02 operating Instructions, tips

WARNING

DV220AE-02810B-01_EN.indd 23

2010-06-28 ¿АИД 5:48:49

Advertising
Ce manuel est liée aux produits suivants: