Samsung BN68-01250B-00 - Manuel (Page 63)

English - 
. Insert a USB drive containing the firmware upgrade into the SERVICE port
on the back of the TV.
. Press the mEnu button to display the menu.
Press the ▲ or ▼ buttons to select "Setup", then press the EntEr button.
. Press the ▲ or ▼ buttons to select SW Upgrade, then press the EntEr
button.
. Press the EntEr button.
The message Scanning for USB... It may take up to 30 seconds. is displayed.
Please be careful to not disconnect the power or remove the USB drive while
upgrades are being applied. The TV will shut off and turn on automatically after
completing the firmware upgrade. Please check the firmware version after the
upgrades are complete.
upgrading the Software
Samsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG
(7267864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a
USB drive to the USB port located on the back of your TV.
Software upgrade
Scanning for uSB...
It may take up to 0 seconds.
Setup
▲ more
film mode : off ►
pIp ►
Function Help : On ►
Sw upgrade ►
tV
move Enter return
tV rear panel
uSB drive
BN68-01250B-00Eng-0403.indd 61 2007-04-17 �� 4:35:07