Samsung DVD-1080P7 - Manuel (Page 19)

ENG- 19
Connections
C
O N N E C T I O N S
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 50 to 51)
- The position of jacks may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable
again when it's not used.
Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using an Optical cable (not included), connect the DIGIT AL
AUDIO OUT (OPTICAL) jack on the rear of the DVD player to
the DIGIT AL AUDIO IN (OPTICAL) jack of the Amplifier.
If using a Coaxial cable (not included), connect the DIGIT AL
AUDIO OUT (COAXIAL) jack on the rear of the DVD player to
the DIGIT AL AUDIO IN (COAXIAL) jack of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT jacks on the rear of the DVD
player to the VIDEO, S-VIDEO, COMPONENT or HDMI-DVI IN
jacks of your TV as described on pages 12 to 16.
3
T urn on your DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select external
input in order to hear sound from your DVD player .
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Optical Cable
(not included)
Coaxial Cable
(not included) or
Dolby digital or
DTS amp