36 error codes – Philips Saeco Talea Ring Plus Manuel d'utilisation

Page 38

Advertising
background image

36

ERROR CODES

GUIDE MESSAGE THAT APPEARS

HOW TO REMOVE THE MESSAGE

out of service (xx)
restart to fix…

:KHUH [[ LGHQWL¿HVDQHUURUFRGH7XUQRIIDQGDIWHU
seconds turn the machine on again to restore normal
operation.If the problem persists, call the service centre and
give the code (xx) shown on the display.

close coffee bean lid

Close the coffee bean hopper cover to be able to make a
beverage.

fill container wth coffee

Put coffee beans into the bean hopper.

insert the brew group

Insert the brew group in its place.

insert grounds drawer

Insert the coffee grounds drawer.

empty grounds

Warning that does not block the machine. Proceed as for
the next alarm.

empty grounds drawer

Remove the grounds drawer and empty the grounds into an
appropriate container (See page 34, steps 4 and 5.).
Note: The grounds drawer must be emptied only when
the machine requires it and when the machine is turned
on. If you empty the drawer with the machine turned off
it will not record the emptying operation.

close door

In order for the machine to operate, the side door must be
closed.

fill the water tank.

7KHWDQNPXVWEHUHPRYHGDQGUH¿OOHGZLWKIUHVKGULQNLQJ
water.

empty the drip tray

Open the side door and empty the drip tray located under
the Brew Group.

change the filter

7KH$TXD3ULPD¿OWHUPXVWEHUHSODFHGLQWKHIROORZLQJ
cases:
1. 60 litres of water have been dispensed;
2. 90 days have passed since its installation;
3. 20 days have passed and the machine has not been
used.

Note: this message only appears when “on” has been
VHOHFWHGLQWKHZDWHU¿OWHUIXQFWLRQ 6HHSDJH 

carafe missing

milk island missing

The steam knob has been turned to the

position and

either the Milk Island has not been installed or the carafe is
not positioned correctly. Install the Milk Island or position
the carafe correctly.
Otherwise, turn the knob until it is in the rest position ( ).

descale

A descaling cycle must be performed on the machine’s
internal circuits.

stand-by…

energy saving…

Press the

button.

Advertising