Samsung DCB-B270R - Manuel (Page 31)

A B L E R E C E I V E R
TROUBLESHOOTING
GB-25
DCB-B270R
GB
The device, packaging material (e.g. Styrofoam) and the batteries must never be disposed of
with household refuse. Please obtain appropriate information about the regulations in your
community, and dispose of all refuse in accordance with regulations at the separate locations
provided.
DISPOSAL
Problem Possible cause Solution of the problem
No display LED on Power cord Power cord plug in correctly
the front panel; not plugged in correctly
No power supply
No pictures on the screen Receiver in Standby mode; Set receiver to “On”;
SCART not connected tightly Check connection;
to video output of television;
incorrect channel or video
Check channel and video output
output selected on television (TV instruction manual)
No sound SCART connected incorrectly; Check connection;
Loudness level = 0; Increase loudness on television set;
Muting active Press the MUTE key
Remote Control does not Incorrect operation; Point remote control
operate directly towards the Receiver.
Batteries dead or inserted Replace batteries or insert correctly
incorrectly
Poor picture quality Signal strength too low Check all wire connections.
signal strength in
On-Screen Error Messages: cable not connected or not Check connection
“Searching for signal” tight
“No signal”
On-Screen Error Message Channel lists not installed Scan channels. Please go to Installation
“No programs are stored” menu
On-Screen Error Messages: Smartcard: (depend on model)
“Smartcard failure” - not plugged in correctly; Check the Smartcard.
“Unknown smartcard” - not plugged in. “Insert the Smartcard.”
“Please insert Smartcard”.
00418A_B270R_XEN_Eng 3/22/07 2:35 PM Page 25