Samsung 800 PN50A450PD - Manuel (Page 6)

English - 6
1 Connect an Optical Cable
between the DIGITAL AUDIO OUT
(OPTICAL) jacks on the TV and the
Digital Audio Input (OPTICAL) jacks
on the Digital Audio System.
When a Digital Audio System is
connected to the DIGITAL AUDIO
OUT (OPTICAL) terminal:
Decrease the volume of the TV,
and adjust the volume level with the
system’s volume control.
➢ What is OPTICAL?
• Converts the electric signal into an
optical light signal, and transmits
it through glass fibers. S/PDIF is a
transmission system of digital audio
in the form of a light wave that uses
a glass conductor.
➢ 5.1CH audio is possible when the TV
is connected to an external device
supporting 5.1CH.
➢ Each external input source device has
a different back panel configuration.
➢ When the COMPONENT IN or HDMI
IN jacks are connected, the Optical
jack on the TV outputs 2 channel audio
only. If you want to hear 5.1 channel
audio, connect the DIGITAL AUDIO
OUT (OPTICAL) jack on the DVD
player or Cable/Satellite Box directly to
an Amplifier or Home Theater, not the
TV.
Connecting a Digital Audio System
1 Connect Audio Cables between the
AUDIO OUT [R-AUDIO-L] on the TV
and AUDIO IN [L-AUDIO-R] on the
Amplifier / DVD Home Theater.
When an audio amplifier is
connected to the AUDIO OUT [R-
AUDIO-L] jacks terminals: Decrease
the volume of the TV, and adjust
the volume level with the Amplifier’s
volume control.
➢ Each Amplifier / DVD Home
Theater has a different back panel
configuration.
➢ When connecting an Amplifier / DVD
Home Theater, match the color of the
connection terminal to the cable.
Connecting an Analog Amplifier / DVD Home Theater

Digital Audio System
TV Rear Panel
Optical Cable (Not supplied)
Amplifier / DVD Home Theater
TV Rear Panel
Audio Cable (Not supplied)

BN68-01363D-00Eng.indd 6 2008-02-15 오후 8:09:26