Washing a load of laundry, Washing clothes manually, Using delay start – Samsung WF-J1254 Manuel d'utilisation

Page 13

Advertising
background image

SAMSUNG Washing Machine Owner’s Instructions C-5

Washing clothes manually

You can wash clothes manually without using the Fuzzy Logic feature. To do so:

1. Turn on the water at the water source sink.

2. Press the ( ) (On/Off) button on the washing machine.

3. Open the door.

4. Load the articles one at a time loosely into the drum, without overfilling.

5. Close the door.

6. Put the detergent and, if necessary, softener or chlorine bleach, in the appropriate compartments.

7. Press the Wash/Rinse Temperature button to select the water temperature.

(Hot/Warm ➝ Hot/Cold ➝ Warm/Warm ➝ Warm/Cold ➝ Cold/Cold )

8. Press the soil level button to select the spin speed for the load.

(Very Heavy ➝ Heavy ➝ Normal ➝ Light ➝ Very Light)

9. Press the Spin button to select the spin speed, [Extra high ➝ High ➝ Medium ➝ Low ➝ No Spin].

Notice:

The rinse hold program allows you to take clothes that are dripping wet out of the

washing machine.

no : No Spin, rh : Rinse Hold.

10. Press the button repeatedly to cycle through the available delayed start options (from 4 hour to 24

hours in one hour increments). Displayed hours means the time of finished washing-cycle.

11. Press the Start/Pause button and the machine will begin the cycle.

When the cycle is finished:

1. Open the door.

Notice:

The door will not open until 3 minutes after the machine stops or the power turns off.

2. Remove laundry.

Using delay start

You can set the washing machine to finish your wash automatically at a later time, choosing from 4 to 24

hour delay (in 1 hour increments). Displayed hours means the time of finished washing-cycle.

To do this:

1. Manually or automatically set your washing machine for the type of clothes you are washing.

2. Press the Delay Start button repeatedly until the delay time is set.

3. Press the Start/Pause button. The Delay Start indicator will light, and the clock will begin counting

down until it reaches your finish time.

4. To cancel Delay Start, press the ( ) (On/Off) button, then turn the washing machine on again.

Washing a Load of Laundry

Advertising