Sony CDX-A251C Manuel d'utilisation

Page 7

Advertising
background image

7

F Disc slot

To insert the disc (label side up), playback
starts.

G Z (eject) button

To eject the disc.

H

(front panel release) button 4

I AUX input jack 10

To connect a portable audio device.

J Receptor for the card remote

commander

K RESET button (located behind the front

panel) 4

L SENS button

To improve weak reception: LOCAL/
MONO.

M EQ3 (equalizer) button 9

To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).

N SOURCE button

To power on; change the source (Radio/CD/
MD*

1

/AUX/SAT*

6

).

O Volume control dial/select button 9

To adjust volume (rotate); select setup items
(press and rotate).

P MODE button 8, 10

To select the radio band (FM/AM)/select the
SAT tuner band (mode)*

6

/select the unit*

7

.

Q DSPL (display)/DIM (dimmer) button

4, 8
To change display items (press); change the
display brightness (press and hold).

R Display window

The following buttons on the card remote
commander have also different buttons/functions
from the unit.

ql < (.)/, (>) buttons

To control CD/radio, the same as (SEEK)
–/+ on the unit.

w; VOL (volume) +/– button

To adjust volume.

wa ATT (attenuate) button

To attenuate the sound. To cancel, press
again.

ws SEL (select) button

The same as the select button on the unit.

wd M (+)/m (–) buttons

To control CD, the same as (1)/(2) –/+ on
the unit.

wf Number buttons

To receive stored stations (press); store
stations (press and hold).

*1 When an MD changer is connected.
*2 When an ATRAC CD is played.
*3 When an MP3/WMA is played.
*4 If the changer is connected, the operation is

different, see page 10.

*5 When playing back on this unit.
*6 When the SAT tuner is connected.
*7 When a CD/MD changer is connected.

Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.

Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 13
.

Advertising