SVAT Electronics S400 - Manuel (Page 4)

w w w . s v a t . c o m
OPERATING PROCEDURE
A. SETTING UP CHANNELS ON SWITCHER
If you would like to view more then one camera on your screen, each
channel has to be stored in the switcher by the following procedure. Each
channel indicates one camera and displays the image of corresponding
camera.
1. Press [Set], setting indication LED will light up
2. Press channel select button, then press [Store] when channel display
LED indicates 1.
3. Press channel select button, then press [Store] when channel display
LED indicates 2.
4. Press channel select button, then press [Store] when channel display
LED indicates 3.
5. Press channel select button, then press [Store] when channel display
LED indicates 4.
6. Press [Set] again when completed [1] ~ [5].
B. AUTO SWITCH FUNCTION
1. Press[Scan] button, the switcher will scan each preset camera
2. The scanning time is adjustable from 1 sec. to 30 sec. Use flat head
screwdriver to adjust the scan time period by turning the tuner
(no. 12 in the switcher parts list).
C. SINGLE CHANNEL SELECTION
1. Setting the scan channel according to the number of the camera
(procedure A). That is if the camera is No. 1, the switcher also has to
be on channel 1.
2. Use the channel selection button up/down to select desired camera
[Indicated by LED display]
Note: The single channel selection automatically stops the
auto-switch function.
D. MUTING
Push [Mute] button to stop audio transmission, and again to resume sound.
E. REMOTE CONTROLLER OPERATING :
1. Press [Scan] button, LED indicator will light up, channel scan
function starts.
2. You can select single channel monitoring by pressing [channel up]
button (LED indicator will light up, the Switcher Channel will up 1
channel) or [channel down] button (LED indicator will light up, the
Switcher Channel will down 1 channel) for channel selection. Please
note, this selection automatically stops the auto-scan function.
3. Push [Mute] button, the LED indicator will light up), to stop audio
transmission, and again to resume sound.