Samsung RF263 - Manuel (Page 15)

Setting Up _15
01
setting
u
P
ADJUSTING THE FREEzER DRAWER LEvEL
1. Locate the height-adjuster ( 1 ) in the freezer drawer.
Unscrew the four Phillips screws ( 2 ) slightly to loosen the door.
2. Loosen the controller screw( 3 ) with a Phillips
screwdriver.
3. Find the best level to align the door slope.
After adjustment, first tighten screw ( 3
) and then screw (
2
).
Freezer Drawer
Adjustment part
1 2
3
Example) The slope is about 2mm (0.08inch) as shown below.
- Rotate the Height Adjuster to +2.0 to reduce the door
slope.
Slope
Reference
plane
DA68-01812H.indb 15 2009.8.10 9:4:17 AM