JVC UXG28 - Manuel (Page 22)

17
English
Timer Operations
Setting the Timer
Using Timer, you can wake up with music, etc.
• You can set the Timer when the System turns on.
• To exit from the timer setting, press
7 as required.
1
To activate the TIMER setting
2
Set On Time
1 Set hour
2 Set minutes
Remote control
TIMER
Main unit
%
4
/
¢
4/¢
STOP
7
STOP
7
TIMER
How Timer actually works
Once the Timer has been set, the timer ( ) indicator
lights on the display. Lights TIMER lamp on the main
unit. Timer is activated at the same time everyday until
the timer is turned off manually.
When the on-time comes
The System turns on, tunes in to the specified station or
starts playing the specified source.
• The sound level is gradually turned up until the last
time you listened to. (Maximum Vol.16)
• While Timer is working, the timer ( ) indicator
lights on the display.
• The timer setting remains in memory until you change it.
• Without canceling the Timer, you can change the
source or adjust the volume after Timer starts playback.
TIMER
MHz
TIMER
2 sec.
TIMER PRESET
TIMER PRESET
UX-G28[C].BOOK Page 17 Monday, November 12, 2007 10:32 AM