JVC G1000S - Manuel (Page 46)

44
OPERATE
VOL.
PAGE
BACK
PRESET
FOCUS
COMPUTER VIDEO
QUICK
ALIGN. AV
MUTING
MENU/ENTER
Operating the Main Menu (Cont.)
Setting and Adjusting Other Functions (OPTIONS) (Cont.)
Notes
• The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
• Items to be set (adjusted) are different when AV signals are
input and when computer-system signals are input.
• When you turn the RESIZE function ON, allowing the screen
to be enlarged virtually to its full size for projection (resizing
display), the video image (resolution) becomes coarse.
5 Set (adjust) the desired item with the
cursor button
2
or
3
.
• To adjust multiple items, repeat steps 4 and 5.
Sets whether to clear the menu display
automatically a fixed time later or not.
(Factory setting : NO)
YES: Clears the display automatically in
about 25 seconds.
NO : Does not clear the display
automatically.
NO YES
Sets whether to show the line display (Y/C,
VIDEO, etc.) at the top of the projected
screen or not. (Factory setting : ON)
OFF: Does not show the line display.
ON : Shows the line display.
(The line display disappears about 5
seconds after it is shown.)
OFF ON
Reverses video image right-to-left.
(Factory setting : OFF)
OFF: For the front method
ON : For upside hanging from the ceiling
OFF
ON
Inverses video image upside-down. (Factory
setting : OFF)
OFF: For normal set-up
ON : For upside hanging from the ceiling
OFF
ON
Sets the clamp pulse’s position at the back
porch (BP) or on the sink tip (ST).
Normally, the clamp is used at BP. If, with
some PCs or workstations, the screen
becomes unstable such as being too dark
or too bright, try to switch to ST.
(factory setting: BP)
BP : The clamp pulse is positioned at the
back porch.
ST : The clamp pulse is positioned on the
sink tip.
BP ST
When the number of pixels (resolution)
sought by the input video is smaller than that
(resolution) of D-ILA device, the video image
is then enlarged to virtually full screen size
of D-ILA device and projected (resizing
display). (Factory setting : ON) Does not work
(cannot be set) for video system input.
OFF : Does not enlarge the video image for
projection. When the number of pixels
sought by video image is smaller than
that of D-ILA device, projection takes
place on a small screen size with a
black area around the screen.
ON : Enlarges virtually to the full screen size
of D-ILA device for projection (resizing
display).
OFF ON
Adjustment item Button Adjustment content
MENU AUTO
OFF
LINE DISPLAY
RIGHT LEFT
REV.
TOP BOTTOM
INV.
CLAMP
RESIZE
2 / 3
2 / 3
2 / 3
2 / 3
2 / 3
2 / 3
MENU/ENTER
button
Cursor buttons
PAGE BACK button
■ Remote control unit
■ Submenu items
[OPTIONS menu]
(To be continued on the next page)
O P T I O N S
M E N U A U T O O F F
L I N E D I S P L A Y
R I G H T L E F T R E V .
T O P B O T T O M I N V .
C L A M P
R E S I Z E
B A C K C O L O R
C O L O R T E M P .
A S P E C T C H A N G E
S L E E P T I M E
L A M P T I M E
N O
O N
O F F
O F F
B P
O N
B L U E
M I D D L E
4 : 3
3 0 M i n .
1 0 H .
G1000S 34-45.EN 98.9.21, 9:56 AM 44