Invacare 6795 - Manuel (Page 30)

Rehab Shower Commode Chair 30 Part No. 1118394
WHEEL LOCKS
SECTION 11 WHEEL LOCKS
Section 11 - Wheel Locks - includes the following:
Using/Adjusting the Wheel Locks
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all
attaching hardware is tightened securely - otherwise injury or damage
may result.
If wheel locks do not hold the occupied Rehab Shower Commode chair in
place contact a qualified technician - otherwise injury or damage may
occur.
USING/ADJUSTING THE WHEEL LOCKS
USING THE WHEEL LOCKS (FIGURE 1)
WARNING
DO NOT attempt to stop a moving Rehab Shower Commode chair with
the wheel locks. WHEEL LOCKS ARE NOT BRAKES - otherwise injury
or damage may occur.
Keep hands and fingers clear of moving parts to avoid injury.
Wheel locks are standard on ALL Rehab Shower Commodes chairs with 24-inch rear
wheels and 5-inch casters (on model nos. 6795 and 6895). These locks are provided to
prevent the rear wheels from turning.
NOTE: Position Rehab Shower Commode chair on a flat, level surface to perform this procedure.
1. Ensure the Rehab Shower Commode chair is not moving before engaging the wheel
locks.
2. To engage wheel locks, push the wheel lock handle forward to the LOCKED
position (DETAIL "A" of FIGURE 1).
3. Disengage the wheel locks by reversing STEP 2 (DETAIL "B" of FIGURE 1).
FIGURE 1 - USING WHEEL LOCKS
DETAIL "A" - ENGAGED DETAIL "B" - DISENGAGED
Wheel Lock
Handle
Wheel Lock
Handle
Wheel Lock
Wheel Lock