Positioning swing-back arms, Replacing armrest pad, Replacing armrest pad (figure 3) – Invacare 6795 Manuel d'utilisation

Page 26: Positioning swing-back arms (figure 2)

Advertising
background image

Rehab Shower Commode Chair

26

Part No. 1118394

ARMS

REPLACING ARMREST PAD (FIGURE 3)

1. Remove the mounting screws that secure the armrest pad to the arm.
2. Replace armrest pad and securely tighten with the existing mounting screws.

POSITIONING SWING-BACK ARMS (FIGURE 2)

WARNING

Make sure the armrest release lever is in the locked position before using

the Rehab Shower Commode chair.

1. Unlock the swing-back arm by pressing the arm release lever towards the arm

frame.

2. Pull the front of the swing-back arm straight up/out of the arm socket and push back

towards the rear of the Shower Commode chair.

3. To lock the swing-back arm, pull the swing-back arm forward and then push down-

ward into the arm socket until an audible "click" is heard.

FIGURE 2 - SWING-BACK ARMS

Arm Release

Lever

Arm Socket

Swing- Back Arm

UNLOCK

LOCK

Arm Frame

SECTION 8

ARMS

Arm

Armrest Pad

FIGURE 3 - REPLACING ARMREST PADS

Mounting

Screws

Advertising
Ce manuel est liée aux produits suivants: