IKEA IBMS1455 - Manuel (Page 7)

7
Display
When power is first supplied to the microwave oven, a “:” will
appear in the display.
When the microwave oven is in use, the display shows cooking
power, quantities, weights and/or prompts. When the microwave
oven is not in use, the display shows the time of day.
Start
The Start control begins any function. If cooking is interrupted,
touching the Start control will resume the preset cycle.
NOTE: To avoid unintentional operation of the microwave oven,
a cooking function cannot be started if the microwave oven door
has been closed for about 5 minutes or more. “DOOR” will
appear in the display until the door is opened and closed.
Stop
The Stop control clears any incorrect command and cancels
most functions. It will not erase the time of day unless the display
is in Set Clock mode. See “Clock” section.
The microwave oven will also turn off when the door is opened.
Close the door and touch Start to resume the cycle.
Add 30 seconds
With the Program dial turned to Manual, the + 30 SEC control
automatically starts the microwave oven at 100% power for
30 seconds. Each additional press of the control will add
30 seconds of cook time.
Cook time may be added to a manual cooking cycle at the
current power level by pressing + 30 SEC.
NOTE: To avoid unintentional operation of the microwave oven, a
cooking function cannot be started if the microwave oven door
has been closed for about 5 minutes or more. “DOOR” will
appear in the display until the door is opened and closed.
Program Dial
Use the Program dial to enter programming modes, or standby
mode.
Push and release to pop out the dial. Turn the dial to make
program selections.
The selected program indicators will appear in the program
indicator display.
Settings Dial
Use the Settings dial to select options, set the clock, set cook
time and cook power, select food type and amount/weight, and
adjust doneness.
Push and release to pop out the dial.
Clock
This is a standard 12-hour clock (12:00-11:59).
To Set:
1. Turn Program dial to the set clock program.
2. Turn Settings dial to set the hour.
3. Press the Start control.
4. Turn Settings dial to set the minutes.
5. Press the Start control to complete the setting.
6. Return Program dial to Off.
To Cancel Clock:
1. Turn Program dial to the clock set program.
2. Press Stop.
The clock will disappear.
3. Return Program dial to Off.
Tones
Tones are audible signals that cannot be turned off, and their
volume cannot be changed. These tones indicate the following:
One tone
■ Reminder, repeat each minute after the end-of-cycle tones
Two tones
■ Hidden feature has been entered or exited
Three tones
■ End of cycle
■ Invalid entry
Control Lock
The Control Lock shuts down the panel controls to avoid
unintended use of the microwave oven.
When the control panel is locked, none of the controls will
function. If a control is pressed, “LOC” will appear in the display
and invalid entry tones will sound.
To Lock/Unlock Control: Before locking, make sure the
microwave oven is off. Press and hold STOP for 3 seconds until
the tone sounds. Repeat to unlock the controls.
Cooling Fan
Depending on the length of the cooking cycle, the cooling fan
may continue to run after that cycle has ended. This is normal,
and helps eliminate moisture that may accumulate inside the
microwave oven before the door is opened.
While the fan is running, “COOL” will appear in the display. The
fan will turn off automatically.