Maytag W10280548C - Manuel (Page 5)

5
CYCLE GUIDE
For best fabric care, choose the cycle that best fits the load being washed.
Not all cycles and options are available on all models.
NOTE: If you are using fabric softener, be sure to select the Fabric Softener - Yes option.
*All rinses are cold.
Sturdy fabrics,
colorfast items,
towels, jeans
Heavy Duty
Heavy
Hot
Warm
Cool
Cold
High Use this cycle for heavily soiled or sturdy items.
Sturdy fabrics,
colorfast items,
towels, jeans
Heavy Duty
Regular
Hot
Warm
Cool
Cold
High Use this cycle for heavily soiled or sturdy items. This cycle
features a spray rinse. Use this cycle for cleaning the interior
of the washer. See “Washer Care.”
Cottons, linens,
and mixed garment
loads
Normal
Heavy
Hot
Warm
Cool
Cold
High Use this cycle for heavily soiled cottons or mixed fabric
loads. This cycle features a spray rinse.
Cottons, linens,
and mixed garment
loads
Normal
Regular
Hot
Warm
Cool
Cold
High Use this cycle for normally soiled cottons and mixed fabric
loads. This cycle features a spray rinse.
No-iron fabrics,
cottons, perm
press, linens,
synthetics
Casual Hot
Warm
Cool
Cold
Low Use this cycle to wash loads of no-iron fabrics such as
sport shirts, blouses, casual business clothes, permanent
press, and blends.
Machine-wash
silks, hand-washed
fabrics
Delicate Hot
Warm
Cool
Cold
Low Use this cycle to wash lightly soiled garments indicating
“Machine Washable Silks” or “Gentle” cycle on the care
label. Place small items in mesh garment bags before
washing. This cycle features a spray rinse.
Swimsuits and
items requiring
rinsing without
detergent
Rinse &
Spin
Cold rinse only High Combines a rinse and high speed spin for loads requiring
an additional rinse cycle or to complete a load after power
interruption. Also use for loads that require rinsing only.
Hand-washed
garments or
dripping wet items
Drain &
Spin
N/A High This cycle uses a spin to shorten drying times for heavy
fabrics or special-care items washed by hand. Use this
cycle to drain washer after cancelling a cycle or completing
a cycle after a power failure.
Items to wash: Cycle: Temperature*: Spin
Speed:
Cycle Details:
SPIN
The washer spins the load at increasing speeds for
proper water removal, based on the selected cycle
and spin speed.
DONE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
LID LOCKED
To allow for higher spin speeds, the lid will lock and the
Lid Locked light will turn on. When this light is lit, the lid is
locked and cannot be opened. When this light is blinking,
the washer is paused. When this light is off,
the lid can be opened.
If you need to open the lid, press
START/Pause/Unlock. The lid will
unlock once the washer movement
has stopped. This may take several
minutes if the load was spinning at
high speed. Press START/Pause/
Unlock again to resume the cycle.