Maytag W10385091A - SP - Manuel (Page 6)

6
CONTROL PANEL AND FEATURES
POWER/CANCEL BUTTON
Press to turn the dryer on and off.
Press to stop/cancel a cycle at any time.
CYCLE CONTROL KNOB
Use your dryer’s Cycle Control knob to select a cycle
for your laundry load. See “Cycle Guide” for detailed
descriptions of cycles.
START/PAUSE BUTTON
Press and hold to start a cycle, or press once while a cycle
is in process to pause it.
MORE TIME/LESS TIME for TIMED CYCLES
Use these buttons with Timed Cycles to increase or
decrease the length of a Timed Cycle.
LED DISPLAY AND SETTINGS BUTTONS
When you select a cycle, its default settings will light up
and the Estimated Time Remaining will be displayed.
Use the buttons along the bottom of the display to adjust
settings. See “Cycle Guide” for available settings on each
cycle. Not all settings are available with all cycles.
1
2
3
4
5
Not all features and cycles are available on all models.
Non-steam models
Cycle Status Lights
The indicator bar in the display will let you know
what stage the drying cycle is in process. For
more information on each stage, see “Cycle Status
Indicators”.
Temp Level
When using Timed Cycles or Custom Refresh, you may
select a dry temperature based on the type of load
you are drying. Use the warmest setting safe for the
garments in the load. Follow garment label instructions.
NOTE: Sensor Cycles use a preset temperature that is
not adjustable.
Dryness Level
You may adjust the Dryness Level on Sensor Cycles, if
desired. If items are not as dry as you would like after
an Sensor Cycle, select More Dry. If items are too dry,
select Less Dry.
NOTE: Dryness Level is for use with Sensor Cycles
only.
Wrinkle Prevent
™ Option
If you will be unable to remove a load immediately,
press Wrinkle Prevent to add 90 minutes of periodic
tumbling to help reduce wrinkling.
Steam models
3 4 2 1 5
6
3 4 2 1 5
6