Memorex MT2365 - Manuel (Page 8)

8
IN OUT
If you connect the TV to VCR, camcorder or TV game, you can
select by pressing the TV/AV button.
Press the TV/AV button repeatedly to select the desired mode.
"AUX1" or "AUX2" will display on the screen for 4 seconds.
CONNECTION TO OTHER EQUIPMENT
The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of
each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.
The connection diagrams in the following are offered as suggestions. You may need to modify them to accommodate your particular
assortment of components. The diagrams are intended to show component video and audio interconnections only.
Press the TV/AV selector button to select the AV mode to use the TV as a monitor.
Operate your VCR as usual.
To playback from the camcorder, connect the camcorder to the
TV as shown.
VIDEO IN
(MONO)
L–AUDIO IN–R
3. To connect the TV to a camcorder
Front of TV
To AV OUT jack
The TV can also be used as a display device for many video
games. However, due to the wide variety of different types of signal
generated by these devices and subsequent hook-up variations
required, they have not all been included in the suggested
connection diagrams. You'll need to consult each component's
Owner's Manual for additional information.
2. To connect the TV to a TV Game
1. To connect the TV to a VCR
Rear of TV
VCR
To Audio/Video
OUT
VIDEO
AUDIO (R)
TV/AV SELECTION
AUX 1
(not supplied)
(not supplied)
A
B
C
HOW TO USE THE REMOTE CONTROL
You can use the remote control to operate your VCR and
Cable/Satellite box besides the TV after the batteries are
installed and you have registered the codes that operate
your products.
Some buttons are used exclusively for each product and
some buttons are used in common with each product.
To operate your products correctly using this universal remote
control follow each step below.
A. For TV
Press TV button.
Aim remote at TV.
Press TV POWER button.
Press other buttons to operate the features of your TV.
You can use the CH
▲ and ▼ button, the 0-9 buttons.
B. For VCR
Press VCR button.
Aim remote at VCR.
Press VCR POWER button to turn on VCR.
Press other buttons to operate the features of your
VCR. You can use the CH
▲ and ▼ button, the 0-9
buttons, the CH ENTER button.
C. For CABLE/SATELLITE box
Press CAB/SAT button.
Aim remote at CABLE/SATELLITE box.
Press CAB/SAT POWER button to turn on your
CABLE/SATELLITE box.
Press other buttons to operate the features of your
CABLE/SATELLITE box. You can use the CH
▲ and
▼ button, the 0-9 buttons and the CH ENTER button.
NOTES: • Some buttons that have same functions are
called different names according to the brand
and model of the product. For example, CALL
may be called "DISPLAY".
• The buttons A, B and C are used exclusively for
each product. You can use these buttons
whenever you want.
REMOTE CONTROL
(CONTINUED)
TV AUX 1 AUX 2
TV GAME
VIDEO IN
(MONO)
L–AUDIO IN–R
Front of TV
(not supplied)
To Audio/Video OUT
1
2
3
4
1
2
3
4
1
2
3
4
1 2 3
4 5 6
7 8 9 0
MENU
RESET
TV VCR CAB/SAT CODE SET
SET ENTER
CH ENTER
CALL
MUTING
VOL
REW
REC PAUSE/STILL STOP
CAB/SAT
POWER
VCR TV
TV/VCR
PLAY F.FWD
CH
CH
VOL
AUDIO SELECT
SLEEP
CH.1/2
TV/CAP/
TEXT QUICK VIEW TV/AV
AUDIO (L)
3I60201A E/COV-09 03*02*2000, 22:40 8