Master Lock dialSpeed Electronic Combination Lock 1500eD - Manuel (Page 5)

General Operation - LED Display Chart
LED Display Status Condition
Arrows and center button on for 1 second. Wake Up When in locked sleep mode
and center button is pressed.
(First arrow button pressed
counts towards code entry)
Center button lights blue and arrows flash
with each press.
Code Entry When in locked sleep mode
and any arrow button is
pressed or during code entry
to unlock.
Center button green for 1 second. Arrows
rotate clockwise twice.
Correct Code After valid code is accepted,
shackle can be pulled open.
Center button blue. Arrows flash twice. Clear Entry After center button is pressed
to clear a code entry.
Center button flashes red 3 times. Code Failed - Max.
Length
After 12 arrow button presses
are made.
Center button green for 1 second. Arrows
rotate counter-clockwise twice.
Locked After shackle is closed.
Center button fades in and out red in
1 second, then off for 2 seconds. Repeats
for 1 minute.
Lockout - 3 Incorrect
Code Entries
After 3rd incorrect code entry.
Pressing center button during
code entry to clear the lock
counts as incorrect entry.
Center button red for 1 second, then sleep
mode.
Time Out 5 seconds after last button
press in locked mode.
5 second time out, no lights on. Time Out - Lock Not
Opened
5 seconds after unlocking
without raising the shackle.
Lock relocks.
Center button flashes yellow for 4 seconds. Low Battery After first button press from
locked sleep mode if battery
voltage low.
Program Mode - LED Display Chart
LED Display Status Condition
Center button white. Each arrow with a
stored code lights until button is pressed.
Stored Code Positions After pressing center button 2
seconds to enter Program Mode.
Center button white. Selected arrow
position flashes twice, then all arrows off.
Arrow Position Selection After pressing an arrow
followed by the center button.
Center button green. Selected arrow
flashes 3 times. Arrows with stored codes
light for 1 second, then sleep mode.
Arrow Position Deletion After pressing and holding
the selected arrow position for
5 seconds.
Center button flashes red 6 times, then
sleep mode.
Arrow Position Deletion
Failed - Primary Code
After the UP position arrow is
selected for deletion.
Center button white. Awaiting New
Code Entry
After center button pressed to
enter new code.
Center button lights white and arrows
flash with each press.
Code Entry During new code entry.
Center button fades in and out white in
1 second. Repeats until any button is
pressed or timeout is reached.
Awaiting Code
Confirmation
Waiting for code
confirmation entry.
Center button green. Selected arrow
flashes 3 times. Arrows with stored codes
light for 1 second, then sleep mode.
Code Accepted When confirmation code
matches initial code.
Center button flashes magenta 6 times,
then sleep mode.
Code Rejected - Invalid When new code is invalid.
Center button flashes red 3 times, then
sleep mode.
Code Rejected - Does
Not Match
When confirmation code does
not match initial code.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. This Class B digital apparatus complies with Canadian ICES-003.
7 8