Monster Power HTFS500 POWERCENTER - Manuel (Page 13)

7
HTPS 7000 MKII POWERSOURCE FEATURES
1. “ON/OFF” Button: Turns ON/OFF the outlets programmed as “SWITCHED ON” or “SWITCHED ON AFTER DELAY”.
2. “Menu” Button: Press to begin programming mode.
3. “Select” Button: Press to set parameters or options selected by the “Menu” button.
4. “Dimmer” Button: Adjusts the brightness of the alphanumeric display.
5. “Analog Audio Filter” Indicator: Indicates power is being supplied to the analog audio outlets.
6. “Digital Filter 1” Indicator: Indicates power is being supplied to the digital outlets.
7. “Digital Filter 2” Indicator: Indicates power is being supplied to the digital outlets.
8. Digital Input Voltage and Current Usage Meter: Indicates input voltage and amperage draw.
9. “Video Filter” Indicator: Indicates power is being supplied to the video outlets.
10. “High Current Filter 1” Indicator: Indicates power is being supplied to the ultra-high current outlets.
11. “High Current Filter 2” Indicator: Indicates power is being supplied to the ultra-high current outlets.
12. “Ground OK” Indicator: Indicates the PowerSource is plugged into a properly grounded 120V AC outlet.
13. “Protection On” Indicator: Indicates Monster surge protection circuitry is functioning properly.
14. “Clean Power On” Indicator: Indicates Monster Clean Power circuitry is functioning properly.
15. “Abnormal Voltage” Indicator: Indicates that the incoming voltage is below approximately 85V AC
or above approximately 127V AC.
16. Wiring Reversed LED Indicator: Indicates if the Line and Neutral wires from the wall outlet
to the PowerSource are reversed. Please consult your electrician to correct this immediately.
17. Analog Audio Filter: These outlets have a specifically designed filter circuit that reduces interference
to your audio components.