Monster Power Professional PowerCenter PRO 5100 - Manuel (Page 13)

6
PRO 5100 POWERCENTER FEATURES
1. “PROTECTION ON“ LED Indicator: Indicates the Monster Power Surge Protection Circuitry is functioning properly.
2. “UNSWITCHED ON“ LED Indicator: Indicates power is being supplied to the unswitched outlets.
3. “SWITCHED ON“ LED Indicator: Indicates power is being supplied to the switched outlets.
4. “TIMED ON“ LED Indicator: Indicates power is being supplied to outlets with the sequential turn-on feature.
5. “WIRING OK“ LED Indicator: Indicates if the Line and Neutral wires from the wall outlet to the PowerCenter are wired
incorrectly (NOTE: If this LED is not illuminated, please consult your electrician to correct reversed wiring immediately).
6. “GROUND OK“ LED Indicator: Indicates the PowerCenter is plugged into a properly grounded 120V AC outlet.
7. “CLEAN POWER ON“ LED Indicator: Indicates the PowerCenter is on.
8. “ABNORMAL VOLTAGE“ LED Indicator: Indicates abnormal line voltage. Turn the PRO 5100 off to protect the
PowerCenter and the components plugged into it from this condition. If the AUTO SHUT OFF setting is enabled,
the unit will automatically shut down when sensing an abnormal voltage condition.
9. Alpha-Numeric Display: In normal operation, the eight-character 2-line LED alphanumeric display indicates voltage
and current. In programming mode, the second line displays options and settings.
10. “ON/OFF“ Button: Press to supply AC power to outlets programmed as SWITCHED ON or SWITCHED ON AFTER DELAY.
Press again to shut these outlets off.
11. “MENU“ Button: Press to begin programming mode.
12. “SET“ Button: Press to set parameters or options selected by the MENU button.
13. “DIMMER“ Button: Dims the alphanumeric display.
14. Unswitched Convenience Outlets: These outlets are located on the front of the PowerCenter for easy access.
These outlets have a specially designed filter circuit for high current audio components.