Maytag W10289539A - Manuel (Page 9)

9
ELECTRONIC OVEN CONTROLS
Display
When power is first supplied to the range or if a power failure
occurs, “12:00” will appear on the display. See “Clock” in the
“Settings” section to set time of day.
When the oven is not in use, the display shows the time of day.
Cancel
The Cancel pads stop any function except the Clock, Timer and
Control Lock.
Oven Lights
While the oven doors are closed, press OVEN LIGHT to turn the
lights on and off. The oven light for the selected oven will come
on when the door is open. The oven lights will not come on
during the Self-Clean cycle.
Kitchen Timer
The Kitchen Timer can be set in hours or minutes up to 9 hours
and 59 minutes, and counts down the set time. The Kitchen
Timer does not start or stop the oven.
To Set:
1. Press KITCHEN TIMER.
“Set TIMER” will scroll down the upper text display area, and
the clock will display “--:--” with the colon flashing.
2. Press the Temp/Time “+” or “-” pads until the desired time is
reached.
“Press TIMER” will scroll down the upper text display area.
3. Press KITCHEN TIMER. The colon stops flashing, and the
time begins counting down. “TIMER STARTED” will scroll
down the upper text display area.
The last minute of the timer countdown will be displayed in
seconds.
At the end of the set time, one long beep will sound, and
“TIMER End” will be displayed.
4. Press KITCHEN TIMER to clear the display.
NOTE: A reminder beep will sound until the Kitchen Timer is
canceled.
To Cancel:
Press KITCHEN TIMER.
Settings
Fahrenheit and Celsius
The temperature is factory preset to Fahrenheit, but can be
changed to Celsius.
1. Press SETTINGS once.
“TEMP UNIT” appears in the upper text area. “Fahrenheit
Press (+) for Celsius” will scroll twice in the lower text area.
2. Press the Temp/Time “+” pad to change the temperature unit
setting.
“CELSIUS. Press (+) for Fahrenheit” will scroll twice from right
to left in the lower text area.
3. “CELSIUS Selected” will scroll twice from right to left in the
lower text area. The temperature units have been changed.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
■ Valid pad press
■ End of Kitchen Timer (long tone)
■ Function has been entered
Two tones
■ Oven is preheated
Three tones
■ Invalid pad press
Four tones
■ End of cycle
A. Upper oven settings
B. Oven display
C. Options settings
D. Oven light
E. Cooktop warming center
F. Lower oven cancel
G. Upper oven cancel
H. Start
I. Temp/time
J. Lower oven settings
K. Convect settings
A B C
D E F G H I J K