Geemarc CL100 - Manuel (Page 8)

SETTING UP
3 - TONE/PULSE SWITCH (T/P)
The Tone/Pulse switch is factory pre-set to Tone
position.In the UK,all telephone exchanges now
use Tone dialing.If your phone does not dial out it
is probably being used from an older private switch
board (PBX).In this case,the Tone/Pulse switch
must be moved to Pulse.
4 -TIME BREAK RECALL SWITCH (300/100)
For UK, the TBR switch is factory pre-set to 100ms.
It can be switched to 300ms for other locations or
PBX’s.
5 - WALL MOUNTING
To wall-mount your telephone,slide out the clip turn
around and slide back into the wall mounting posi-
tion (located in the base unit, just below the ear
piece).This will ensure that the handset stays firmly
in position.Make 2 holes in the wall 80mm apart,
insert the wall plugs and the wall mounting screws.
8